What Chicago-area installers actually charge, from their own published prices, and what Chicago winters do to a garage floor. Price your floor below, then see it coated in a photo of your own garage.
For prices across the US, see our guide to epoxy garage floor cost.
Researched by the Pictimate research team · Prices checked October 6, 2026 · How we research
| Source | System | Published price | Dated |
|---|---|---|---|
| TORQ CoatingsLombard | Polyaspartic / polyurea | $7 to $13 per sq ft; 2-car (500 sq ft) $3,500 to $6,500 | Feb 2026 |
| A1 Concrete CoatingsElk Grove Village | 1-Day Flake (polyurea / polyaspartic) | $5 to $12 per sq ft; 2-car (400 to 576 sq ft) $2,400 to $5,800 | not dated |
| Integrity Concrete CoatingsSycamore | Polyurea base, flake, polyaspartic top | $6 to $10 per sq ft; 2-car (440 sq ft) $2,640 to $4,400 | Oct 2026 |
| High Performance Concrete CoatingsAddison | Epoxy, solid or decorative flake / quartz | $2.50 to $7 per sq ft, most jobs $3.75 to $6.50; decorative $5.25 to $6; repairs extra | not dated |
High Performance Concrete Coatings' FAQ prices have not changed since at least 2021. Integrity Concrete Coatings is based in Sycamore and gives its price for Northern Illinois. Prices as published on each source's own site, re-checked October 6, 2026. They change, and none of them is a quote. No business pays to be included, and none can pay to change its row or its place in any list. Where an installer we cite is also a Pictimate customer, the page says so next to it.
Pick your space and finish, upload a photo, and see it coated, with a price range built from what Chicago-area installers publish. If you want quotes, leave your details and we'll pass them to a local installer. Serving Chicago, Naperville, Wheaton, Lombard & area.
Honest answers here make the estimate accurate — prep is the biggest cost variable in any coating job. Not sure? Leave the defaults and we'll confirm on site.
Textured, durable — the garage favourite
Salt and de-icer come in on your tires all winter. Combined with repeated freezing and thawing, it opens micro-cracks and makes the surface pit and flake, which installers call salt scaling. That is why installers here recommend polyurea and polyaspartic systems. A pitted floor needs repair first, which adds to the price.
Standard epoxy needs a warm slab through the whole cure, and the product's data sheet sets the minimum temperature, so an unheated Chicago garage limits when epoxy can go down. Polyaspartic and other cold-rated products can go down in cooler conditions. Ask which product your installer uses and what slab temperature it needs.
Many older bungalows and two-flats sit on slabs that stay damp. Moisture coming up through the concrete can make a coating lift, so careful installers test for it and use a moisture-mitigating primer where needed. Ask whether your quote includes a moisture test.
Installers here price a 2-car garage at 400 to 576 sq ft. A1 Concrete Coatings uses 400 to 576 sq ft, Integrity Concrete Coatings 440 and TORQ Coatings 500. The calculator above starts at 450. Measure yours for a closer number.
TORQ puts prep at 30 to 50 percent of the total. An older floor has to be ground, its cracks and spalling filled, and any old coating ground off, so a worn or previously coated slab costs more. A quote that is far below the others usually skips some of this.
Three Chicago-area installers publish a 2-car price, all for polyurea or polyaspartic flake floors, and their ranges run from $2,400 to $6,500: A1 Concrete Coatings $2,400 to $5,800, Integrity Concrete Coatings $2,640 to $4,400 and TORQ Coatings $3,500 to $6,500. None of the installers here publishes a 2-car epoxy price; High Performance Concrete Coatings prices its epoxy by the square foot only, at $2.50 to $7. Cracks, salt damage and old coatings add to that.
Both work when the prep is right. Chicago installers favour polyaspartic and polyurea for salt and cold, and they usually cost more. A common middle ground is an epoxy base with a polyaspartic topcoat. Whatever you choose, the slab has to be ground and cleaned first.
Sometimes. Standard epoxy needs a warm slab through the whole cure, which an unheated garage rarely holds in a Chicago winter. Polyaspartic and other cold-rated products can go down colder, and the product's data sheet sets the limit, so ask what slab temperature your installer's system is rated for.
One-day systems are polyaspartic or polyurea, not epoxy, and one day means one day of work. A1 Concrete Coatings prices its polyurea and polyaspartic 1-Day Flake system at $5 to $12 per sq ft. Ask when you can drive on it, not just how long the install takes.
Generally, Illinois treats a contractor installing materials into your home as the end user of those materials, so they pay tax on what they buy and you are not charged sales tax on the installation. Check how your installer bills it.
No. It is a range built from what local installers publish. An installer confirms the real price after seeing your floor, usually with a free visit. If you want quotes, leave your details and we will pass them to a local installer.
Spot an error or a price that has changed? Tell us and we'll fix it.
Install floors in Chicago? Get a page like this with your prices and your name →